The integrated door endurance tester is special designed and manufactured as per IEC 60335-2-11 clause 20.101, IEC 60335-2-6 clause 22.108, IEC 60335-2-24 clause 22.112. Suitable for testing tumble washing machine / dryer doors, pyrolytic self-cleaning ovens doors, refrigerator doors. It is a special equipment for durability and structural testing of doors of small household appliances.
HJ0607 is specially designed for sintering density detection of household appliance ceramic components. It complies with IEC 60335-1:2020 Clause 22.32 standard and supports fuchsin penetration test under 0-20MPa high pressure environment (pressure rise rate 100kPa/s).
The HJ0605 automatic cable reel tester is designed for household and similar electrical automatic cable reels. It complies with the IEC60335-1 Clause 22.16 standard. It simulates a high-frequency cable reeling and unreeling cycle of 30 times/minute (the maximum rate depends on the device structure) to detect the effects of the cable reel on the wear of the soft cable sheath, conductor breakage and contact loss. It is a core device for home appliance manufacturers and quality inspection agencies to verify the reliability of cable reel structures.
HJ0606 oxygen bomb aging tester strictly complies with international standards such as IEC 60335-1 Clause 22.32, IEC 60811-1-1 and IEC 60811-1-2, and is specially designed for oxidative thermal aging performance testing of polymer materials such as wires and cables, rubber (plastic, leather) insulation layers and sheaths.
HJ0616 Household Appliances Current-Carrying Hose Bending Resistance Tester is designed according to IEC60335-2-2 Safety of Household and Similar Electrical Appliances Part 2-2: Particular Requirements for Vacuum Cleaners and Water Suction Cleaning Appliances, Clause 21.103 and Figure 102. Its main purpose is to determine the bending resistance of current-carrying hoses used in household appliances.
HJ0602 electrical impulse voltage tester, with an output voltage of up to 12kV (±5%), accurately generates 1.2/50μs standard impulse waveform (wavefront time 1.2μs±30%, half-wave time 50μs±20%), complies with IEC 60335-1 Clause 14 standard, has built-in overvoltage and overcurrent protection, and can automatically or manually detect transient overvoltage, electrical clearance and creepage distance of household appliance components. It is widely used in household electrical safety performance testing.
HJ0615 Domestic electricity communication pipe abrasion resistant test design, conforms to IEC60335-2-2 safety standard (Clause 21.102), Support suction pipes, cleaning equipment pipes, laundry machine water pipes, etc., and million-day wear-resistant circulation rings.
Designed specifically for microwave ovens and oven door systems, it complies with the IEC 60335-2-25 safety standard (Clause 18 mechanical durability test requirements) and supports millions of opening and closing cycle tests on hinges, seals and other components. It is suitable for home appliance manufacturers and quality inspection agencies to verify the mechanical life and sealing of oven door systems, and is the core testing equipment for microwave oven safety certification.
The Household Appliance Supply Cord Flexing Test Apparatus is special designed and manufactured according to IEC60335-1 clause 25.14, it is used to check the power cord flexing (bending) resistance performance of the small household appliances (such as Coffee pot / electric iron) and lamps, also applicable for power cord flexing endurance tester of plugs and sockets.
The device is used to check abrasion strength of printed circuit boards or the insulating accessible parts of the household appliances. It conforms to the standard requirement of IEC60950 clause 2.10.8.4 and IEC60335-1 clause 21.2.
The HJ0610 electric iron drop tester was born based on this concept. It not only meets the strict international standards, but also incorporates a number of humanized designs to make the operation easier and more efficient. Whether it is product testing in the R&D stage or quality control in the production process, HJ0610 can provide you with accurate and reliable data support, protect your product quality, and safeguard your branda.
The BRT-007 is a highly intelligent battery charge-discharge tester, supporting 0-150A constant current discharge. It wirelessly monitors cell voltages (with a precision of ≤±0.05%) and automatically records discharge data. Suitable for 48V/110V battery packs, it features overvoltage, overcurrent, and overtemperature protection, meeting the needs of battery capacity testing, lifespan evaluation, and maintenance, thus enhancing battery pack reliability.