Household appliance performance testing equipment

HH-RR-503S is designed for laboratory-level gas water heater performance testing. It supports full performance verification of water heaters in the power range of 0-40kW, and integrates 30+ core indicator tests such as thermal efficiency (accuracy ±0.8%), hot water output rate (resolution 0.1L/min), and safety protection (flameout response ≤30s). It uses imported high-precision sensors and intelligent measurement and control systems, complies with GB 6932 and EN 61326 international standards, and automatically generates full-item test reports. It is a professional testing platform for water heater manufacturers, scientific research institutions and third-party laboratories.

This test corner conforms to the standard requirement of IEC60335-1Clause 11.2. It is designed and manufactured To Provide The Required Environment For The Temperature Rising Test of all kinds of electrical, electrical products. It can be customized according to the different testing samples.

The test appliance conforms to IEC60335-1:25.15. It is used to test the power cord tension and torque at the terminal two trials of the appliances which are with a power cord, and intended flexible cord permanently connected to the fixed wiring and other household electrical appliances, medical equipment, checking whether the clamping device is secure.

This equipment is designed based on the standard IEC60335-2-2 Household and similar electrical appliances – Safety – Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances clause 21.101. Its main purpose is to test the crushing resistance of current-carrying hoses.

The integrated door endurance tester is special designed and manufactured as per IEC 60335-2-11 clause 20.101, IEC 60335-2-6 clause 22.108, IEC 60335-2-24 clause 22.112. Suitable for testing tumble washing machine / dryer doors, pyrolytic self-cleaning ovens doors, refrigerator doors. It is a special equipment for durability and structural testing of doors of small household appliances.

HJ0607 is specially designed for sintering density detection of household appliance ceramic components. It complies with IEC 60335-1:2020 Clause 22.32 standard and supports fuchsin penetration test under 0-20MPa high pressure environment (pressure rise rate 100kPa/s).

The HJ0605 automatic cable reel tester is designed for household and similar electrical automatic cable reels. It complies with the IEC60335-1 Clause 22.16 standard. It simulates a high-frequency cable reeling and unreeling cycle of 30 times/minute (the maximum rate depends on the device structure) to detect the effects of the cable reel on the wear of the soft cable sheath, conductor breakage and contact loss. It is a core device for home appliance manufacturers and quality inspection agencies to verify the reliability of cable reel structures.

HJ0606 oxygen bomb aging tester strictly complies with international standards such as IEC 60335-1 Clause 22.32, IEC 60811-1-1 and IEC 60811-1-2, and is specially designed for oxidative thermal aging performance testing of polymer materials such as wires and cables, rubber (plastic, leather) insulation layers and sheaths.

HJ0616 Household Appliances Current-Carrying Hose Bending Resistance Tester is designed according to IEC60335-2-2 Safety of Household and Similar Electrical Appliances Part 2-2: Particular Requirements for Vacuum Cleaners and Water Suction Cleaning Appliances, Clause 21.103 and Figure 102. Its main purpose is to determine the bending resistance of current-carrying hoses used in household appliances.

HJ0602 electrical impulse voltage tester, with an output voltage of up to 12kV (±5%), accurately generates 1.2/50μs standard impulse waveform (wavefront time 1.2μs±30%, half-wave time 50μs±20%), complies with IEC 60335-1 Clause 14 standard, has built-in overvoltage and overcurrent protection, and can automatically or manually detect transient overvoltage, electrical clearance and creepage distance of household appliance components. It is widely used in household electrical safety performance testing.

HJ0615 Domestic electricity communication pipe abrasion resistant test design, conforms to IEC60335-2-2 safety standard (Clause 21.102), Support suction pipes, cleaning equipment pipes, laundry machine water pipes, etc., and million-day wear-resistant circulation rings.

Designed specifically for microwave ovens and oven door systems, it complies with the IEC 60335-2-25 safety standard (Clause 18 mechanical durability test requirements) and supports millions of opening and closing cycle tests on hinges, seals and other components. It is suitable for home appliance manufacturers and quality inspection agencies to verify the mechanical life and sealing of oven door systems, and is the core testing equipment for microwave oven safety certification.