This test corner conforms to the standard requirement of IEC60335-1Clause 11.2. It is designed and manufactured To Provide The Required Environment For The Temperature Rising Test of all kinds of electrical, electrical products. It can be customized according to the different testing samples.
The test appliance conforms to IEC60335-1:25.15. It is used to test the power cord tension and torque at the terminal two trials of the appliances which are with a power cord, and intended flexible cord permanently connected to the fixed wiring and other household electrical appliances, medical equipment, checking whether the clamping device is secure.
This equipment is designed based on the standard IEC60335-2-2 Household and similar electrical appliances – Safety – Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances clause 21.101. Its main purpose is to test the crushing resistance of current-carrying hoses.
HJ0607 is specially designed for sintering density detection of household appliance ceramic components. It complies with IEC 60335-1:2020 Clause 22.32 standard and supports fuchsin penetration test under 0-20MPa high pressure environment (pressure rise rate 100kPa/s).
The HJ0605 automatic cable reel tester is designed for household and similar electrical automatic cable reels. It complies with the IEC60335-1 Clause 22.16 standard. It simulates a high-frequency cable reeling and unreeling cycle of 30 times/minute (the maximum rate depends on the device structure) to detect the effects of the cable reel on the wear of the soft cable sheath, conductor breakage and contact loss. It is a core device for home appliance manufacturers and quality inspection agencies to verify the reliability of cable reel structures.
Designed specifically for microwave ovens and oven door systems, it complies with the IEC 60335-2-25 safety standard (Clause 18 mechanical durability test requirements) and supports millions of opening and closing cycle tests on hinges, seals and other components. It is suitable for home appliance manufacturers and quality inspection agencies to verify the mechanical life and sealing of oven door systems, and is the core testing equipment for microwave oven safety certification.
This device is used for the bearing capacity testing of rotary grills.Confirm to IEC60335-2-9 clause 3.1.9.102 figure 102,Household and similar electrical appliances-Safety-Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances.
HC9934 creepage distance test card strictly complies with GB2099.1 Article 27, GB4706, GB7000, IEC60884-1, IEC60598, IEC335 and other international standards. It is specially designed to measure the distance between conductive parts of electrical appliances along the surface of insulating materials to ensure electrical safety.
