The test rod probe confirms to IEC61032 figure 15 requirements. It is intended to verify the protection provided by fan guards against access to hazardous mechanical parts. It is equipped with nylon handle.Customizable: It is used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer).
This equipment is used to assess the good performance of the product enclosure and components during the storage, transportation and use in rainy weather.It is mainly suitable for electrical and electronic products, lamps, electric cabinets, electrical components, communication products, automobiles, motorcycles and their parts, outdoor lighting and signal devices and other products to do waterproof performance test and IP waterproof grade test.
AM0006 drive shaft torsion tester is an ideal partner for automotive parts performance testing. It is designed for automotive drive shafts, couplings, connectors and other parts. By simulating the torsion load under actual working conditions, it accurately detects the mechanical properties of the parts, ensures the stable operation of the product in a complex environment, and safeguards the safety and performance of the car.
This rain test box is an equipment for the protection grade test of electrical equipment for shell protection.It is mainly used to assess and determine whether the shells and seals of various electrical appliances, electrical products and various lighting fixtures can ensure the good working performance of the equipment and components after the water test or during the test.It is also an essential testing equipment for scientific research institutions and quality testing institutions.
The electric vibration test system comprises four components: vibration test-bed, power amplifier, controller, and cooling fan. Widely used in industries including automotive parts, aerospace, machinery, navigation, communication, and electronics, it tests structural stability of samples to enhance product stability.
This equipment is suitable for the test of electrical electronics, automobiles, motorcycle parts, and seals to prevent sand dust from entering the seals and housing in a sand dust environment.To test the use, storage and transportation performance of electronic and electrical products, automobiles, motorcycle parts, and seals in the sand and dust environment.The purpose of the test was to determine the possible harmful effects of the particles carried by the air flow on the electrical products.
This test sphere probe confirms to IEC61032 figure 5 test probe 1,IEC60335,IEC60950, IEC60598,UL507 standards. It is intended to verify the degree of protection of enclosures against ingress of solid foreign objects having a diameter of 50mm or greater. It is also regarded as the steel ball for dropping impact test. It can be equipped with a lifting ring, and used for pendulum bob test after hanging with a rope. Steel balls with other diameters can be customized.
The smoke detector of the battery explosion-proof test chamber is a safety performance test device used to simulate the explosion or fire of the battery under conditions such as short circuit, overcharge, thermal runaway, etc. It provides a closed and explosion-proof space to ensure that when an accident occurs to the battery, it can effectively prevent the spread of explosion and flame, and protect the safety of surrounding personnel and equipment.
As a source manufacturer focusing on quality, we bring you the HH0820 waterproof test system, which is deeply adapted to all levels of waterproof testing from IPX1 to IPX8. Whether it is electronic equipment, automotive parts or outdoor equipment, it can provide reliable verification of your product's waterproof performance with accurate environmental simulation, helping you seize the market trust.
This test network conforms to the measuring network requirements of IEC60990 touch current and the measurement method of protective conductor current, (figure 4-mesuring network touch current weighted (sensory current or reaction current). This network is convenient to use and easy to operate, and the power supply switch is made separately, which can solve the shortcomings of power supply capacity of the previous machine and can test the more powerful products.
This test network conforms to the measuring network requirements of IEC60990 touch current and the measurement method of protective conductor current, (figure 4-mesuring network touch current weighted (sensory current or reaction current). This network is convenient to use and easy to operate, and the power supply switch is made separately, which can solve the shortcomings of power supply capacity of the previous machine and can test the more powerful products.
A high - performance testing equipment used to simulate extreme high and low temperature environments for conducting reliability tests on products in various fields like electronics, electrical appliances, communications, automobiles, and aerospace. It helps companies enhance product quality and competitiveness by providing accurate test data.
