This probe made of stainless steel and nylon, the sphere made of stainless steel, the baffle and handle made of nylon. The diameter of sphere is 50mm. Baffle diameter is 45mm. Baffle thickness is 4 mm. Handle diameter is 10mm. Handle length is 100mm. It has no force, but there is an M6 threaded hole at the end of the handle to connect the push-pull meter.
We know your desire for precision and reliability, so the HT-I28 Test Finger Probe was born. It is not just a tool, but also your trusted partner in the field of electrical safety. Whether it is the door interlock device detection of the microwave oven, or the anti-electric shock, shell protection and other tests, it can bring you a safe testing experience with accurate parameters and stable performance.
HT-I24 Test Finger Probe is specially designed for the safety inspection of hand blenders. It strictly complies with the IEC 60335-2-14 standard. It uses a nylon handle and a stainless steel probe to accurately inspect and provide reliable protection for the safety performance of hand blenders. It is your trusted inspection partner.
This probe conforms to standard requirement of UL507 Fig 8.1(PA160B) and UL1278 Fig 9.1(PA160). It is used for testing accessibility to hazardous moving parts such as access to fan blades through a fan finger guard. The handle is made of nylon while the finger is made of stainless steel. The end of the handle is with threaded hole which can be equipped with the dynamometer.
The Cone Probe meets UL1278 Fig 10.1 standards, featuring a stainless - steel probe and nylon handle. Designed to test heating elements and components, it ensures protection against contact with people and flammable materials. Engineered to the standard’s specifications, it delivers reliable results for safety compliance evaluations.
The stirrer shall incorporate a biased-off switch that is recessed or guarded to prevent accidental operation. It conforms to the IEC60335-2-14 requirement.
Appliance is checked by applying a cylindrical rod whose diameter is 40mm and which has a hemispherical end to touch the switch with a force not exceed 5N.The appliance shall not operated.
This probe conforms to the IEC60335-2-11 figure 104 and IEC60335-2-6-2002 figure 104 standard requirements. It is mainly used to measure the temperature rise on the front surface of the easily accessible parts of drum-type dryer, upright electric cooker, cooking bench and oven.