These two test probe separately confirm to the IEC60884-1 figure 9 and figure 10.The HT-I20 test probe with 20N force is used to test whether the live parts inside can be touched. The HT-I21 test probe with 1N force is for testing whether the live parts with the protection of socket can be touched.
HT-I26 scratch probe is specially designed for the easily accessible component surfaces of the protected cooling system in household appliances, including the scratch test of the easily accessible surface in close contact with the protected cooling system, such as the scratch resistance test of refrigerator doors. It strictly complies with GB4706.13 Figure 102, IEC60335-2-24 Figure 102 and other standards, and the quality is guaranteed by the source manufacturer.
The stirrer shall incorporate a biased-off switch that is recessed or guarded to prevent accidental operation. It conforms to the IEC60335-2-14 requirement.
Appliance is checked by applying a cylindrical rod whose diameter is 40mm and which has a hemispherical end to touch the switch with a force not exceed 5N.The appliance shall not operated.
This probe conforms to the IEC60335-2-11 figure 104 and IEC60335-2-6-2002 figure 104 standard requirements. It is mainly used to measure the temperature rise on the front surface of the easily accessible parts of drum-type dryer, upright electric cooker, cooking bench and oven.
The UL accessibility probe is also called UL articulated probe or jointed test finger probe. It conforms to many standard requirement of UL474 Fig 5.1, UL507 Fig 9.2(PA100A), UL982 Fig 7.1, UL1017 Fig 2, UL1062 Fig1.2, UL1278Fig 8.3, UL1310 Fig 16.2, UL6500 Fig14, UL60065 Fig14 and UL60950 Fig NAF.1.
HT-U16 Test Finger Probe is designed in strict accordance with UL507 Fig 8.2 (S2140A) standard. Its innovative nylon handle + stainless steel probe combination takes into account both operational comfort and detection accuracy, providing reliable protection for product safety.
It conforms to the standard of UL499 Fig 6.4 and UL982-2006 Fig 58.5(PA190). It is applicable for the electrical equipment. The handle is made of Nylon, and the tip is stainless steel.
HT-U09 Test Finger Probe is manufactured in strict accordance with the international standard UL507 Fig 8.2 (S2140A) and is suitable for safety testing of stationary fans and impellers and other moving parts of fans that are intended to be permanently electrically connected.
