HJ Test System Co.,Ltd

products

IEC 60335-2-6 Electrical Appliance Tester Load For Testing Rotating Spits 100mm Diameter
This device is used for the bearing capacity testing of rotary grills.Confirm to IEC60335-2-9 clause 3.1.9.102 figure 102,Household and similar electrical appliances-Safety-Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances.

view detail
Iec61701 Salt Spray Test Chamber Automotive Parts Testing Equipment
AM0046 Automobile Parts Salt Spray Test Chamber strictly complies with GB-T10587-2006, IEC 68-2-52 and other authoritative standards at home and abroad. The equipment has precise temperature and humidity control capabilities (temperature range RT + 5℃~60℃, humidity range 30%~98% RH), and the salt spray deposition is stable and controllable (1~2ml/80 cm².mean h, 16 hours). It is made of high-quality corrosion-resistant materials (PP reinforced hard plastic plate or 316 stainless steel for the box body, imported SUS304 stainless steel for the saturated barrel), and has multiple safety protection functions. It is a reliable and professional equipment for testing the salt spray resistance of automobile parts.

view detail
Vertical Pressure Structure Battery Crush Nail Penetration Test Equipment High Efficiency
HB6205 battery extrusion puncture tester strictly complies with international standards such as IEC62133, IEC60086, UL1612, etc. It is specially designed to simulate the actual use environment of power lithium batteries and is a key equipment for battery performance testing.

view detail
TUV Electrical Appliance Tester CK2 / CK5 Stainless Creepage Distance Test Cards IEC60335
HC9934 creepage distance test card strictly complies with GB2099.1 Article 27, GB4706, GB7000, IEC60884-1, IEC60598, IEC335 and other international standards. It is specially designed to measure the distance between conductive parts of electrical appliances along the surface of insulating materials to ensure electrical safety.

view detail
2 mm Thickness Clause 24.17 And 24.18 Figure 32 Stainless Steel Cover Plate Gauge
HC9930 cover gauge Conforms to the standards: GB2099.1-2008 Section 24.17 and Figure 32, IEC60884-1 Figure 32,Suitable for checking the contour of covers or cover plates.

view detail
4mm Hazardous Live Parts Probe Test Finger Probe IEC 1010 / IEC60065 / EN61010-1
This testing probe is used to verify the protection against access to hazardous parts through top openings.It meets IEC, EN, UL and CSA Standards, including IEC 1010, IEC60065, EN61010-1, UL3101-1, and CSA 1010-1.

view detail
Socket Guard Door Probe IEC60884-1 Figure 9 / Figure 10 Test Finger Probe With Force
- test finger probe
- iec 61032 test probe
- jointed test finger
- test probe
- finger probe test
- test probe b
HT-I20，HT-I21 20N socket protection door probe strictly complies with GB2099.1 - 2008 and IEC884 - 1.2002 related standards. It is specially designed to check whether the live parts inside the socket protection door are touched to ensure the safety of electricity use.

view detail
UL1278 Fig 10.2 Bar Test Finger Probe Stainless Steel
- test probe
- test probe b
- articulated finger probe
- iec 61032 test probe b
- probe test
- probe equipment
HT-U06 strictly complies with UL1278 Figure 10.2 standard and is specially designed for protection testing of heating elements and heating components, ensuring the safety protection of flammable materials and people. It is your reliable testing partner.

view detail
String Light Flat Test Finger Probe IEC60598-2-20 Clause 20.11.2.
- test probe
- test probe b
- articulated finger probe
- iec 61032 test probe b
- probe test
- probe equipment
HT-I29 flat probe strictly complies with international standards such as GB7000.9 Section 11.2 and IEC60598-2-20 Section 11.2. It is specially designed for light string detection to ensure that metal decorations are not electrified and ensure safety.

view detail
IEC60335-2-14 Test finger Probe With Diameter 125mm Circular Stop Face Probe Length 100mm
- test probe
- probe test
- iec 61032 test probe b
- probe equipment
- test probe b
- articulated finger probe
As a source manufacturer, our large baffle test finger HT-I02B strictly complies with GB/T16482-2008 Figure 2, IEC61032 Figure 2 and other international standards. It is used to test the basic protection against human contact with dangerous parts and the protection against finger contact, to ensure the safety of electrical products.

view detail
IEC 62368-1 Figure V4 Test Finger Probe Wedge Probe For Testing Document Shredders
HT-U14 wedge probe strictly complies with international standards such as IEC 60950-1 Figure NAF.2 (S5366), NAF.3 (S5370) and BS 60950.1108/260/CD. It is specially designed for shredder protection testing and can accurately detect the accessibility of dangerous parts of shredders to ensure safe use.

view detail
IEC61032 Children Finger Probe 18 HT-I12 Hemispherical R4.3±0.05 Finger Probe Diameter Ф8.6±0.1
- iec 61032 test probe b
- test probe
- articulated finger probe
- test probe b
- probe test
- probe equipment
HT-I12 large children test finger strictly complies with GB/T16842, IEC61032 and other international standards. It is specially designed to simulate the test of children aged 36 months to 14 years old coming into contact with dangerous parts. It can accurately detect the safety of electrical appliances and other products to ensure the safety of children.

view detail

1 2 3 4 5 6 7 8 9 10 15 16

A total of 16 pages

categories

how can we help you

You can contact us any way that is convenient for you. We are available 24/7 via email or telephone.

Contact Us

Featured products

Need Help? Chat with us

leave a message

Home

Products

whatsApp

contact