HT-U08 Test Rod Probe is designed strictly in accordance with UL1278 Fig 10.4 standard and is specially designed for safety protection detection of heating elements and their components. Its unique nylon handle + hard steel probe combination takes into account both operating comfort and detection reliability. It is a powerful assistant in the field of electrical safety detection and provides accurate protection for the safety protection of heating equipment.
HT-U09 Test Finger Probe is manufactured in strict accordance with the international standard UL507 Fig 8.2 (S2140A) and is suitable for safety testing of stationary fans and impellers and other moving parts of fans that are intended to be permanently electrically connected.
It conforms to the standard of UL499 Fig 6.4 and UL982-2006 Fig 58.5(PA190). It is applicable for the electrical equipment. The handle is made of Nylon, and the tip is stainless steel.
Food waste probe 31 confirms to IEC61032 figure 14 standard. It is used for checking food waste disposal units of milling system of hazardous mechanical parts whether is touched or not.Rod: Ø25mm, 80mm long, interchangeable metal or Delrin probe. It conforms to the IEC61032 Test probe 31.The handle is made of nylon,tip is made of stainless steel.
The UL accessibility probe is also called UL articulated probe or jointed test finger probe. It conforms to many standard requirement of UL474 Fig 5.1, UL507 Fig 9.2(PA100A), UL982 Fig 7.1, UL1017 Fig 2, UL1062 Fig1.2, UL1278Fig 8.3, UL1310 Fig 16.2, UL6500 Fig14, UL60065 Fig14 and UL60950 Fig NAF.1.
The Test Finger Probe B is a precision test probe made according to Figure 2 (Fig. 2) of the IEC61032 (Test probe B) and is used to simulate a human finger. It is also used by the standards of CSA, IRAM, UL and in most of the rules involved in the verification of accessibility to live parts.
This test plug conforms to IEC60065 Figure 8 standard requirement. It is used to test the antenna coaxial socket which is installed on the device and equipped with parts or components which isolate the hazardous live parts and accessible parts. Its structure should be able to withstand the expected mechanical stress that might encounter during the use process. It is made entirely of stainless steel. All parts are machined with precision.
HT - I03 Test Rod Probe is specially designed for testing the protection performance of electrical equipment. It is suitable for testing the protection structure that prevents human contact with dangerous parts. It can also be used to test the protection that prevents hand-held tools from touching.
Test Finger Probe is a professional testing tool that strictly complies with authoritative standards such as GB4706.1 Figure 7, IEC60335 Figure 7, etc. It is mainly used to test whether the fixing method of non-detachable parts that prevent contact with live parts, waterproof or prevent contact with moving parts can withstand the mechanical stress in normal use.
