Safety regulation test equipment

This pin is intended to be used on appliances for verifying the inaccessibility of hazardous live parts or hazardous mechanical parts which are liable to be touched accidentally by a tool, for example a screwdriver or similar pointed object in normal use. It meets IEC61032 figure 8 test probe 12. Handle is made of nylon while the tip is made of hardened steel.Customizable: It can be used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer).

This test probe conforms to IEC60335-2-24 Clause 21.102. It is used for protection test on the lamps of household appliances.

The HT-U07 triangular probe strictly complies with the UL1278 Fig 10.3 standard and is specially designed for safety protection detection of heating elements and components. It protects flammable materials and personnel safety with precise and reliable performance.

The test thorn probe is intended to verify the protection against access to glowing heating elements. It complies with IEC61032 figure 16 Test probe 41, IEC60335 standard requirements.

The test hook complies with IEC60065. It is used to test whether the dangerous electric parts can be touched. The test hook is “hooked” into vents and seams in the enclosure & then pulled with a force (usually 20N). The hook has a hole at its long end, for use in conjunction with a PFI series Force Gauge. It is made entirely of stainless steel.

We know your desire for precision and reliability, so the HT-I28 Test Finger Probe was born. It is not just a tool, but also your trusted partner in the field of electrical safety. Whether it is the door interlock device detection of the microwave oven, or the anti-electric shock, shell protection and other tests, it can bring you a safe testing experience with accurate parameters and stable performance.

The test pin is used to do the scratch resistant test of the electrical solid insulation surface. It conforms to the standard requirement of IEC60335-1 clause 21.

The test rod probe confirms to IEC61032 figure 15 requirements. It is intended to verify the protection provided by fan guards against access to hazardous mechanical parts. It is equipped with nylon handle.Customizable: It is used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer).  

This test sphere probe confirms to IEC61032 figure 5 test probe 1,IEC60335,IEC60950, IEC60598,UL507 standards. It is intended to verify the degree of protection of enclosures against ingress of solid foreign objects having a diameter of 50mm or greater. It is also regarded as the steel ball for dropping impact test. It can be equipped with a lifting ring, and used for pendulum bob test after hanging with a rope. Steel balls with other diameters can be customized.

This test network conforms to the measuring network requirements of IEC60990 touch current and the measurement method of protective conductor current, (figure 4-mesuring network touch current weighted (sensory current or reaction current). This network is convenient to use and easy to operate, and the power supply switch is made separately, which can solve the shortcomings of power supply capacity of the previous machine and can test the more powerful products.

This test network conforms to the measuring network requirements of IEC60990 touch current and the measurement method of protective conductor current, (figure 4-mesuring network touch current weighted (sensory current or reaction current). This network is convenient to use and easy to operate, and the power supply switch is made separately, which can solve the shortcomings of power supply capacity of the previous machine and can test the more powerful products.

The 8-channel temperature recorder is specially designed for safety testing of household appliances and electrical products. It strictly complies with Clause 11 of the general safety requirements of IEC 60335-1 and accurately captures the temperature rise data of microwave ovens, refrigerators and other electrical appliances during operation. It is a core tool for safety testing in laboratories and production lines.