VEAT-006 is a fully integrated air-cooled water ring vacuum system, integrating water ring vacuum pump, gas-liquid separator, air-cooled radiator and intelligent control cabinet, realizing the core advantages of "air-cooled self-cooling (no external water required) + closed cycle (95% water saving) + 24h full-load operation", suitable for scenes without cooling water and harsh working conditions (such as outdoor and high-temperature production lines), meeting ISO 16078 safety and GB 19153 energy efficiency standards, covering vacuum distillation, drying, dust removal and other processes.
VEAT-005 is a Roots + dry screw pump integrated vacuum system, which adopts the combination of "ZJY Roots pump (main pump) + dry screw pump (foreline pump)", achieving a high pumping speed of 150m³/h (10Pa working condition), dry oil-free cleaning (Class 5 clean room compatible), and closed-loop exhaust gas recovery. It is suitable for processes with strict environmental protection and cleaning requirements such as medicine (vacuum freeze-drying), chemical industry (solvent recovery), and electronics (semiconductor processing), and complies with ISO 21360 (Roots pump) and GB/T 3216 (screw pump) standards.
VEAT-007 is a fully integrated water-cooled vacuum system that integrates a water ring vacuum pump, a gas-liquid separator, a heat exchanger, and an intelligent control cabinet. It achieves 24-hour full-load operation, closed circulation of working fluid (saving 50% water), and an oil-free clean vacuum environment. It is suitable for vacuum distillation, drying, coating and other processes, and is resistant to harsh working conditions such as dust and high temperature. It complies with ISO 16078 safety standards and GB 19153 energy efficiency requirements.
The VEAT-008 Roots rotary vane unit adopts a modular combination of "Z-type Roots pump (main pump) + X-type single-stage rotary vane pump (forestage pump)", integrated with air intake filtration and intelligent electrical control unit, covering a wide vacuum range of 10⁻³~10²Pa, with an instantaneous air extraction volume increased by 30%. It is suitable for vacuum drying, smelting, impregnation and other processes, and solves the pain points of traditional pumps such as "insufficient pumping speed, pump oil backflow, and temperature rise overload", helping the production line to operate efficiently and stably.
VEAT-010 is a vacuum central dust removal system customized for the semiconductor industry. It integrates cyclone pre-separation + 0.1μm filter dust removal + pulse back-blowing cleaning technology. It is designed for ultra-fine dust (≤1μm) in LED wafer cutting and packaging, achieving 99.9% capture efficiency and 200m pneumatic transmission, meeting ISO 14644 clean room standards, ensuring production line cleanliness and personnel health.
VET-001 integrates a two-stage architecture of Roots pump + rotary vane vacuum pump, achieving an efficient pumping speed of 30L/S and an ultimate vacuum of 1×10⁻²Pa. It is equipped with an Omron/Weinon touch screen + PLC numerical control system, supports automatic fault diagnosis, adaptive startup and remote control, and is suitable for industrial vacuum scenarios such as electronics, semiconductors, and laboratories.
