Battery Pack Rain Test Chamber (IPX9K) 800mm Spray Ring IEC 60529 High Pressure Water Resistance Tester

Battery Pack Rain Test Chamber (IPX9K) 800mm Spray Ring IEC 60529 High Pressure Water Resistance Tester

Product Introduction

The BPT-004 is a professional solution for waterproof testing. It features an Italian HAWKE imported high - pressure pump and a jet - type heating device, ensuring stable and powerful water spray. The water quality filtration system prevents nozzle blockage, while the programmable controller and full - color touch control system developed independently offer easy operation and stable performance. The SUS304 stainless - steel frame guarantees smooth movement. It can test products under different water spray conditions, helping manufacturers ensure product quality and safety.

Features

High-quality Components:

• Utilizes Italian HAWKE imported high - pressure pump for strong and stable water output.
• Equipped with a jet - type heating device for simulating various temperature conditions.

Filtration and Control:

• Has a water quality filtration system to prevent nozzle blockage, ensuring long-term reliable operation.
• Adopts a Panasonic programmable controller and self-developed full-color touch control system for easy and precise operation.

Sturdy Structure:

• The SUS304 stainless steel equipment frame ensures smooth movement and durability.

Adjustable Testing Parameters:

• The spray ring radius is 800mm, and the nozzle adjustable range is 350mm, providing flexible test setups.
• The height from the ground can be adjusted within 700 - 1700mm, and the water flow per spray is 14 - 16 liters per minute.
• The water tank temperature can be set at normal temperature (25°C) or 80±5°C (with negotiable deviation), and the water spray pressure ranges from 8000 - 10000 kPa.

Multi-angle Spray:

• With 4 spray holes and nozzle angles of 0°, 30°, 60°, and 90° (vertical direction), it can simulate different spray directions.

Rotating Disk:

• The rotating disk has a diameter of 800mm, a speed adjustable from 4 - 10r/min, and a load-bearing capacity of 200KG, facilitating comprehensive testing.

Energy - efficient and Quiet

• Low - noise design and energy - saving features make it suitable for long - term operation.

International reference standards

IEC 60068-2-68: This standard specifies the test methods for the protection provided by enclosures against water.

GB/T 4208: It is the Chinese standard for the protection provided by enclosures against external mechanical impacts and water.

IEC 60529: Defines the degrees of protection provided by enclosures (IP code), which is widely used in the assessment of product waterproof and dustproof performance.

ISO 20653: This standard is related to the protection of road vehicles against water, dirt, and similar substances, which is relevant for vehicle - related waterproof testing.

Product use

Automotive Industry: Test the waterproof performance of passenger cars, buses, tractors, motorcycles and their components, such as batteries, electrical systems, and body parts, ensuring they can withstand various weather conditions during use.

Electronics Industry: Verify the water resistance of electronic products, especially battery packs, to prevent short - circuits and other failures caused by water ingress.

Manufacturing Industry: Used for the design, improvement, verification, and factory inspection of various products to ensure their physical and related performance under high - pressure/steam jet cleaning processes.

Test objects and inspection items

Test objects: Passenger cars, buses, tractors, motorcycles, battery packs, electrical components, and various electronic products.

Inspection items: Water resistance, protection against high-pressure water jets, protection against steam jet cleaning, and assessment of physical and related performance under water-related stress conditions.

Technical Parameters